Marley Engineered Products FSSWH1502 Spécifications télécharger pdf (Page 1)

WHEN USING ELECTRIC APPLIANCES, BASIC PRECAU-

TIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE

RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO PER-

SONS, INCLUDING THE FOLLOWING:

1. Read all instructions before installing or using this heater.

2. This heater is hot when in use. To avoid burns, do not let

bare skin touch hot surfaces. Keep combustible materials,

such as furniture, pillows, bedding, papers, clothes, cur-

tains, etc. at least 3 feet (0.9 m) from the front of the heater.

3. Extreme caution is necessary when any heater is used by or

near children or invalids and whenever the heater is left

operating and unattended.

4. Do not operate any heater after it malfunctions. Disconnect

power at service panel and have heater inspected by a qual-

ified electrician before using.

5. Do not use outdoors.

6. To disconnect heater, turn controls to OFF, and turn OFF

power to heater circuit at main disconnect panel.

7. Do not insert or allow foreign objects to enter any ventilation

or exhaust opening as this may cause an electric shock, fire,

or damage to the heater.

8. To prevent a possible fire, do not block air intake or exhaust

in any manner.

9. A heater has hot and arcing or sparking parts inside. Do not

use it in areas where gasoline, paint, or flammable liquids

are used or stored.

10. Use this heater only as described in this manual. Any other

use not recommended by the manufacturer may cause fire,

electric shock, or injury to persons.

11. This heater is provided with a red alarm light that will illumi-

nate ONLY if the heater has turned off as a result of over-

heating. If you see the light on, immediately turn the heater

OFF and inspect for any objects on or adjacent to the heater

that may have blocked the airflow or otherwise caused high

temperatures to have occurred. DO NOT OPERATE THE

HEATER WITH THE ALARM LIGHT ILLUMINATING.

12. This heater is intended for comfort heating applications and

not intended for use in special environments. Do not use in

damp or wet locations such as marine or greenhouse or in

areas where corrosive or chemical agents are present.

13. When installing, see INSTALLATION INSTRUCTIONS for

additional warnings and precautions.

14. For safe and efficient operation, and to extend the life of your

heater, keep your heater clean - See MAINTENANCE

INSTRUCTIONS.

SAVE THESE INSTRUCTIONS

Installation, Operation & Maintenance Instructions

WARNING

PPD 35950 06/12 5200-11092-000

IMPORTANT INSTRUCTIONS

HOSS Series (Rev B)

Smart Series

Large Wall Heater

MIN. SUPPLY

MODEL VOLTS PHASE WATTS AMPS WIRE GAUGE

HOSS4008 208 1 1800-4000 19.2 10

HOSS4004 240 1 1800-4000 16.7 10

HOSS4007 277 1 1800-4000 14.4 12

Table 1. Specifications

READ CAREFULLY - This manual provides instructions for the correct installation, safe use, and care of this product. Special atten-

tion should be directed to the warnings provided below which identify certain precautions and special instructions for safe and effi-

cient installation and use. Studying these instructions first may save you considerable time and money later and keep your installa-

tion time to a minimum. If you are not familiar with electricity or feel uncomfortable in working with electricity, refer the installation of

this product to a licensed electrician or qualified person.

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - HOSS Series (Rev B)

WHEN USING ELECTRIC APPLIANCES, BASIC PRECAU-TIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THERISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO PER-SONS, INCLUD

Page 2 - INSTRUCTIONS

INSTALLATIONINSTRUCTIONSThe heater is designed for recessed installation in 2” x 4” (50 mm x 101 mm) studs or larger wall sections using the backbox p

Page 3 - Existing Construction

Installation of Back Box in Existing Construction1. Provide a wall opening 14-1/2" (362 mm) wide by 18-1/2" (470 mm) high at the desired mo

Page 4 - OPERATION

Wiring of HeaterRefer to Wiring Diagram, Figure 41. Connect the black (L1) heater pigtail from ON/OFF switch tothe black power lead on the heater asse

Page 5 - Customizing Heater Settings

2. Set Day and Time: NOTE: For the following setup procedures, the display will auto-matically save the setting after a 30 second pause and return tot

Page 6 - MAINTENANCE

Beep Volume ControlThere are three settings for the audible beep, 2=HIGH , 1=LOW,0=OFF. To adjust the audible beep, follow these instructions.1. Make

Page 7 - REPAIR PARTS

7128111591013REPAIR PARTSRepair Parts List812567Part Number Ref HTWH4008 HTWH4004 HTWH4007No. Description 208V 4000W 240V 4000W 277V 4000W Quantity1 P

Page 8 - LIMITED WARRANTY

LIMITED WARRANTYAll products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one ye

Commentaires sur ces manuels

Pas de commentaire

Marley Engineered Products FSSWH1502 Spécifications Page 1

Naviguer en ligne ou télécharger Spécifications pour Chauffages d'appoint Marley Engineered Products FSSWH1502. Marley Engineered Products FSSWH1502 Specifications Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Marley Engineered Products FSSWH1502 Spécifications Page 1

Naviguer en ligne ou télécharger Spécifications pour Chauffages d'appoint Marley Engineered Products FSSWH1502. Marley Engineered Products FSSWH1502 Specifications Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Chauffages d'appoint Marley Engineered Products FSSWH1502